Technical specifications
| Plug Type | Maximum power (AC) | Battery Capacity |
| Type 2 (Mennekes) | 11 kW | 85 kWh |
Charging Capabilities and Time
The Audi e-tron GT supports three-phase AC charging with a maximum output of 11 kW. Below are the charging times depending on the type of charger used:
| Charger Type | Voltage / Amperage | Power | Charging Time |
| Mobile Charger (2.3 kW) | 230V / 1x10A | 2.3 kW | 43h 30min |
| 1-phase 16A | 230V / 1x16A | 3.7 kW | 27h 15min |
| 1-phase 25A | 230V / 1x25A | 5.8 kW | 17h 15min |
| 1-phase 32A | 230V / 1x32A | 7.4 kW | 13h 30min |
| 3-phase 16A | 400V / 3x16A | 11 kW | 9h 15min |
| 3-phase 25A | 400V / 3x25A | 11 kW* | 9h 15min |
| 3-phase 32A | 400V / 3x32A | 11 kW* | 9h 15min |
* Limited by the vehicle’s maximum capability
Charging cables and stations
The Audi e-tron GT uses a Type 2 plug and supports three-phase charging of up to 11 kW. You can use a cable rated for 11 or 22 kW, but the charging speed will be limited by the car to 11 kW.
Compatible charging stations:
– 3.7 kW (1 phase, 16A) – up to 3.7 kW
– 7.4 kW (1 phase, 32A) – also up to 3.7 kW
– 11 kW (3 phase, 16A) – full compatibility
– 22 kW (3 phase, 32A) – charges up to 11 kW
Compatibility with the electrical panel
To take advantage of the maximum charging power, your electrical installation must support three-phase power supply (3x16A). If you currently have a single-phase system, the maximum power will be limited to 3.7 kW. You can install a three-phase charging station and temporarily use it in single-phase mode.
Mobile Charging Device
Mobile (portable) chargers connect directly to a standard socket (220V) and are a convenient solution for charging at home or on the go. For the Audi e-tron GT, a mobile charger with a Type 2 plug is required. Due to the large battery capacity (85 kWh), we recommend using these devices mainly as a backup option.
